Marmorit UK GmbH

DVD Construction Detail Drawings

Each file below is presented in both PDF and Data Exchange Format (.dxf) format.
Simply click the PDF or DXF icons to begin downloading.

Alternatively, download all the files in one single PDF document.

	Built-in roller shutter box – flush with masonry	(1.3.06)
	Built-in roller shutter box – projecting	(1.3.07)
	Cantilevered balcony slab – insulated on all sides, ETICS – with starter track	(1.6.01)
	Cantilevered balcony slab – insulated on all sides, ETICS directly applied	(1.6.02)
	Cantilevered balcony slab – with thermal break	(1.6.03)
	Ceramic system	(1.1.04)
	Cylindrical plug as anchorage base for medium loads	(1.7.03)
	Cylindrical plug as pressure pad for anchorage of heavy loads	(1.7.05)
	DIFFUTHERM applied to panel product, with starter track at plinth	(2.2.05)
	Eaves / roof boarding junction (unventilated roof)	(1.4.01)
	Eaves / roof boarding junction (ventilated cold roof)	(1.4.02)
	Eaves / roof boarding junction (ventilated warm roof)	(1.4.03)
	Eaves / roof boarding junction for over-rafter insulation (ventilated roof)	(1.4.04)
	Eaves / roof boarding junction with DIFFUTHERM (unventilated roof)	(2.4.01)
	Eaves / roof boarding junction with THD N+F (unventilated roof)	(2.4.01a)
	ETICS applied to panel product, bottom junction with aluminium window sill, windows externally flush	(2.3.09)
	ETICS applied to panel product, bottom junction with aluminium window sill, windows internally flush	(2.3.08)
	ETICS applied to panel product, windows externally flush	(2.3.02)
	ETICS applied to panel product, windows internally flush	(2.3.01)
	Existing building	(1.1.02)
	Expansion joint (surface) with two stop beads	(1.5.02)
	Expansion joint (surface) with U-shaped section	(1.5.01)
	FID 50 anchor for later fixing of light loads to insulation	(1.7.02)
	Fixing rose for anchorage of light loads	(1.7.01)
	Flat roof junction (example with existing building)	(1.4.08)
	Flat roof junction (new-build example)	(1.4.09)
	Flush plinth junction	(1.2.05)
	Imitation ashlar render with trapezoidal fillet	(1.9.04)
	Incorporating jamb insulation	(1.3.01)
	Incorporating jamb insulation	(1.3.02)
	Incorporation of expansion joint in area of external fire spread	(1.8.06)
	Junction with existing works	(1.5.04)
	Junction with facing masonry using Quix	(1.5.05)
	Junction with guide rail for built-in roller shutter box	(1.3.12)
	Junction with guide rail for front-fixed roller shutter box	(1.3.11)
	Junction with ventilated curtain wall	(1.5.06)
	Lintel construction incorporating LICHTKEIL as fire barrier	(1.8.05)
	Lintel construction incorporating mineral-fibre plank	(1.8.01)
	Lintel construction with front-fixed roller shutter box	(1.8.03)
	Lintel construction with scrim fold	(1.8.02)
	Lintel construction with volamit for windows proud of structural wall	(1.8.04)
	Monopitch roof / upper wall junction	(1.4.06)
	Monopitch roof / upper wall junction with stop bead for flashings	(1.4.07)
	New-build scheme	(1.1.01)
	Partial-area insulation – junction with non-insulated area	(1.9.01)
	Partial-area insulation without thermal bridging at external building angle	(1.9.02)
	Pelmet over blind box	(1.3.09)
	Penthouse insulated on all sides	(1.4.10)
	Pitched roof / upper wall junction	(1.4.05)
	Pitched roof / upper wall junction with stop bead for flashings	(1.4.05a)
	Plinth insulation carried below ground with Quix	(1.2.04)
	Plinth insulation carried slightly below ground	(1.2.08)
	Plinth insulation not carried below ground	(1.2.06)
	Radiused Quix starter blocks at plinth	(1.2.03)
	Recess in facade with drip	(1.9.03)
	Roof edge junction	(1.4.12)
	Sliding joint (horizontal expansion joint)	(1.5.03)
	Solid timber construction directly faced with DIFFUTHERM / corner detailing	(2.1.09)
	Solid timber construction directly faced with DIFFUTHERM in areas subject to splashing	(2.2.07)
	Solid timber construction directly faced with DIFFUTHERM, fastener-fixed	(2.1.08)
	Solid timber construction directly faced with DIFFUTHERM, stapled	(2.1.08a)
	Solid timber construction directly faced with DIFFUTHERM, with starter track at plinth	(2.2.06)
	Solid timber construction double-faced with DIFFUTHERM, fastener-fixed	(2.1.08b)
	Solid timber construction double-faced with DIFFUTHERM, fastener-fixed	(2.3.05)
	Square-Edge Quix starter blocks at plinth	(1.2.02)
	Starter track at plinth	(1.2.01)
	Threshold with bracket supports (front balcony)	(1.6.05)
	Threshold with bracket supports (patio door)	(1.6.06)
	Timber studwork directly faced with DIFFUTHERM	(2.1.02)
	Timber studwork directly faced with DIFFUTHERM	(2.1.03)
	Timber studwork directly faced with DIFFUTHERM	(2.1.04)
	Timber studwork directly faced with DIFFUTHERM	(2.1.05)
	Timber studwork directly faced with DIFFUTHERM	(2.1.06)
	Timber studwork directly faced with DIFFUTHERM in areas subject to splashing	(2.2.04)
	Timber studwork directly faced with DIFFUTHERM, bottom junction with aluminium window sill, windows externally flush	(2.3.11)
	Timber studwork directly faced with DIFFUTHERM, bottom junction with aluminium window sill, windows internally flush	(2.3.10)
	Timber studwork directly faced with DIFFUTHERM, front-fixed roller shutter box, with starter track, timber / aluminium window	(2.3.06)
	Timber studwork directly faced with DIFFUTHERM, front-fixed roller shutter box, with starter track, timber window	(2.3.07)
	Timber studwork directly faced with DIFFUTHERM, plinth flush	(2.2.03)
	Timber studwork directly faced with DIFFUTHERM, windows externally flush	(2.3.04)
	Timber studwork directly faced with DIFFUTHERM, windows internally flush	(2.3.03)
	Timber studwork directly faced with DIFFUTHERM, with Quix starter blocks at plinth	(2.2.08)
	Timber studwork directly faced with DIFFUTHERM, with starter track at plinth	(2.2.02)
	Timber studwork directly faced with THD N+F	(2.1.03a)
	Timber studwork directly faced with THD N+F	(2.1.04a)
	Timber studwork directly faced with THD N+F in areas subject to splashing	(2.2.04a)
	Timber studwork directly faced with THD N+F, bottom junction with aluminium window sill, windows externally flush	(2.3.11a)
	Timber studwork directly faced with THD N+F, bottom junction with aluminium window sill, windows internally flush	(2.3.10a)
	Timber studwork directly faced with THD N+F, front-fixed roller shutter box, with starter track, timber / aluminium window	(2.3.06a)
	Timber studwork directly faced with THD N+F, front-fixed roller shutter box, with starter track, timber window	(2.3.07a)
	Timber studwork directly faced with THD N+F, plinth flush	(2.2.03a)
	Timber studwork directly faced with THD N+F, windows externally flush	(2.3.04a)
	Timber studwork directly faced with THD N+F, windows internally flush	(2.3.03a)
	Timber studwork directly faced with THD N+F, with Quix starter blocks at plinth	(2.2.08a)
	Timber studwork directly faced with THD N+F, with starter track at plinth	(2.2.02a)
	Timber studwork directly faced with THD N+F	(2.1.02a)
	Timber studwork with ETICS applied to panel product	(2.1.01)
	Timber studwork with ETICS applied to panel product, with starter track at plinth	(2.2.01)
	Top junction with front-fixed roller shutter box	(1.3.08)
	Track system	(1.1.03)
	Universal mounting plate for anchorage of heavy loads	(1.7.06)
	Widening of roof edge with edge trim	(1.4.11)
	Window apron unit, window proud of structural wall	(1.3.10)
	Window flush with structural wall, with waterproof sheet	(1.3.05)
	Window flush, bottom junction with aluminium window sill	(1.3.04)
	Window recessed, bottom junction with aluminium window sill	(1.3.03)
	Zyrillo as anchorage base for medium loads	(1.7.04)